Inquiry
Form loading...

Reflective amplitude type spatial light modulator FSLM-2K73-A01

Functional Features:

1、Suitable for different spectral ranges of 350nm-420nm, 420nm-1700nm;

2、Resolution: 2048×2048, the only large square target in the industry;

3、80%-85% high light utilization rate.

4、Multi-slice liquid crystal light valve splicing solutions are available;

5、One-piece and outward-facing configurations are available to meet a wide range of installation requirements;

6、Phase type products of the same specification are available, allowing for independent control of amplitude and phase.

    Product Parameters

    Model Number

    FSLM-2K73-A01

    Modulation Type

    Amplitude Type

    Liquid Crystal Type

    Reflection

    Grayscale Level

    8 bit, 256 step

    Liquid Crystal Mode

    VA

    Driving Method

    Digital signal

    Resolution

    2048×2048

    Pixel Size

    6.4μm

    Effective Area

    0.73" 13.1mm×13.1mm

    Contrast Ratio

    1000:1

    Fill Factor

    93%

    Optical Utilization

    85%

    Linearity

    99%

    Response Time

    ≤30ms

    Refresh Frequency

    60Hz(8bit)*

    Spectral Range

    350nm-420nm

    damage threshold

    50mW/cm2

    Data Interface

    HDMI

    Power Input

    12V 3A

    Gamma Correction

    Support

    Supporting software

    1. Based on C/C++ development, running environment: Windows7 Sp1 and above, 32bits/64bits; adapted to our various types of spatial light modulator products.

    2. Horizontal flip, vertical flip, grayscale flip, gamma correction, face correction and other image transformation functions support Chinese and English language switching.

    3. Integrate a variety of specific light field control functions: such as diffractive light field, non-diffractive light field, structural light field.

    4. Integrate more than twenty kinds of experimental projects, 35 Zernike polynomials, and support the superposition between phase diagrams.

    5. Real-time online adjustment and control of all kinds of light field parameters.

    6. Quickly correct the wavefront aberration according to the actual demand.

    7. It can be extended independently and dynamically displayed in external input mode.

    8. Autonomous selection of playback mode to realize high-speed refresh playback.

    9. Green running mode without installation, directly unzip and run.

    spatial light modulatordfn

    Areas of application

    application (1)hv7
    application (2)4o0
    application (3)eqa
    application (4)fql
    • Holographic tweezers
    • Optical communication
    • Optical storage
    • Biomedical imaging
    • Atmospheric turbulence simulation
    • Adaptive Optics
    • Laser processing
    • Fluorescence microscopy
    • Automotive HUD
    • Super-resolution microscopy
    • Micromanipulation
    • Teaching instrument
    • Beam shaper
    • Liquid Crystal Phased Array
    • Wavelength selector switch

    Leave Your Message